compressing strain中文是什么意思

• 压缩应变

• "compress"中文翻译    vt. 压缩，浓缩；使(文章等)变简练。 vi. 经受压 ...
• "strain"中文翻译    n. 1.血统，家世；族，种；【生物学】品系，系；菌株； ...
• "compressing" 中文翻译 :    压缩加工
• "compressing and expanding" 中文翻译 :    压缩与扩张
• "compressing apparatus" 中文翻译 :    压紧装置
• "compressing bandage" 中文翻译 :    压迫绷带
• "compressing barrier" 中文翻译 :    压缩阻片
• "compressing box" 中文翻译 :    压捆室
• "compressing cabin" 中文翻译 :    加压舱
• "compressing components" 中文翻译 :    压缩部分（气缸部分）
• "compressing curve" 中文翻译 :    压缩曲线
• "compressing cycle" 中文翻译 :    压缩周期
• "compressing cylinder" 中文翻译 :    压缩缸
• "compressing flow" 中文翻译 :    压缩流动
• "compressing force" 中文翻译 :    压缩力
• "compressing machine" 中文翻译 :    压缩机, 压紧
• "compressing mechanism" 中文翻译 :    压缩机构; 压制机构; 压制机械
• "compressing pump" 中文翻译 :    压送泵; 增压泵
• "compressing ratio" 中文翻译 :    压缩比
• "compressing roll" 中文翻译 :    压实辊
• "compressing rubber" 中文翻译 :    压缩橡皮
• "compressing spring" 中文翻译 :    压缩弹簧
• "compressing strength" 中文翻译 :    抗压强度
• "compressing stress" 中文翻译 :    压缩应力; 压应力
• "compressing switch" 中文翻译 :    压缩开关

• We studied the influence of the interface strain and it shows that the lattice mismatch between substrate and film is the main reason of the above observations . expand strain decreases tm - i with increasing resistivity and compressed strain has the opposite effect . using double exchange model of zener these results can be explained qualitatively
  27欧姆厘米，转变温度是78与154开尔文，磁场强度为7t时，磁阻率为习3及巧6 x结合双交换模型和不同的应力作用，逐一解释了产生差异的缘由，其中我们也讨论了具有）取向的la 。
• It can be concluded that the performance differences between the plate membrane and the hollow fiber membrane can be attribute to difference of the stresses in the membranes when they were under pressure and the difference of the strain caused in the membrane , besides the possible reason that the surface curvature difference between a plate substrate and a hollow fiber one may cause structure difference in the dense functional layer when coating . the stresses in a hollow fiber composite membrane under an outside pressure are quite different from that in a plate one in that they exert on the hollow fiber in both the radial and circular directions , and the compress strain of the hollow fiber is thus much more complex , which may cause the top layer crinkle and a decreased salt rejection
  分析认为造成平板复合膜( )和中空纤维复合膜( )性能差异的主要原因，除了平板基膜与中空纤维基膜因表面曲率不同可能引起在涂覆时形成的致密功能层结构上的差异之外，由于中空纤维膜受外压时，膜内部承受的应力形式与平板膜不同，会同时在径向(膜厚度方向)和环向(膜面内方向)两个方向产生压应力，因此，所发生的形变也较为复杂，可能造成表面复合层的起皱或脱落，引起脱盐率下降。